Slate-Lite Spezialimprägnierung is a water-based impregnation for Slate-Lite surfaces on the wall with low wear.
It is solvent-free and penetrates the porous surface without visibly changing it (as a rule no to very slight color enhancement). This reduces absorbency so that water, oil and grease can penetrate much less easily – dirt can be wiped off more easily.
- Suitable for: walls (low wear) – not recommended for kitchen/bathroom or wet areas
- Durability: low
- Color change: low
- Contents: 1,000 ml
- Coverage: approx. 30 m² per liter (with 2 coats)
For application, keep the surface clean, dry and free of coatings. Apply the impregnation evenly with a short-nap roller (do not press too hard to avoid bubbles). After approx. 30 minutes, wipe off any residue with a dry cloth. Depending on wear, the impregnation should be renewed regularly (guideline: every 3–4 years).
Please test each accessory product in a small, inconspicuous area before use and always follow the information provided in the relevant data sheets. In particular, drying and processing times, substrate requirements, and application temperatures must be observed. The user is responsible for proper application and for the results achieved.